The levelling rake spreads sand and topdressing evenly across the lawn and pushes it into holes and hollows. Used regularly, it gradually makes the surface level.
At a glance
- Bolted stainless steel frame, 90 × 25 cm, no distortion from welding heat
- Working width 90 cm, 1.80 m with extensions
- Two-part handle with T-grip for working upright
- Alternatively with a mount for a standard wooden handle (Ø 28 mm)
- Handle detaches without tools and stores in a small space
What the levelling rake is for
After aerating and topdressing, the rake spreads the sand and works it into the holes. With topdressing it evens out hollows and unevenness. It can also spread molehills and level the seedbed before overseeding.
Bolted, not welded
Welding stainless steel creates heat, and heat distorts the material. For a tool whose only job is a flat surface, a few millimetres make all the difference. That is why the frame of the levelling rake is bolted: what is joined without heat stays straight.
T-grip for working upright
Conventional rakes are used bent over, with a sideways sweeping motion. Over time that strains the back. With the T-grip the rake is pushed and pulled back and forth while standing upright. This makes a real difference, especially when working topdressing in crosswise.
Handle and working width
| Version |
Handle |
Good to know |
| With handle and T-grip |
two-part, 160 cm, powder-coated steel in anthracite (RAL 7016) |
joined with two screws, tool included; can be hung on the universal holder |
| With mount for wooden handle |
mount made of powder-coated steel for a standard wooden handle (Ø 28 mm) |
wooden handle not included; two holes are drilled into the wooden handle for fixing |
| Working width |
Suitable for |
| 90 cm |
working in sand, evening out hollows, areas of any size |
| 1.80 m (with two extensions of 45 cm each) |
fine finishing on areas that are already fairly level; the long edge bridges shallow undulations |
How to use it
- Mow the lawn as short as possible beforehand.
- Spread the sand or topdressing.
- Pull the levelling rake back and forth in lanes, then across them.
After topdressing
As long as sand is still lying on the surface, mow with a rotary mower rather than a reel mower. Sand blunts the reel.
Levelling rake or drag mat?
Both work sand into the lawn, but each has its own strengths. The levelling rake has a rigid edge: it takes sand from the high spots and drops it into the hollows, levelling the surface as it goes. The drag mat is flexible and follows the ground: it spreads sand and seed evenly into the sward and the aeration holes without changing the surface.
| Situation |
Tool |
| Uneven surface, evening out hollows and bumps |
Levelling rake |
| Topdressing a large, level area quickly and evenly |
Drag mat |
| Working in overseed and creating seed-to-soil contact |
Drag mat |
| Full renovation with aeration and overseeding |
Levelling rake, then drag mat, brush for finishing |
| Individual spots where sand stays on top |
Brush |
More on sand type, quantity and timing: Topdressing tool guide.
Assembly and storage
The handle attaches to the frame without tools and detaches just as quickly. Taken apart, the rake fits neatly on a shelf. A replacement grip is available separately.
Scope of delivery
- Bolted stainless steel frame, 90 × 25 cm
- Two-part handle with T-grip or mount for wooden handle (Ø 28 mm, wooden handle not included), depending on selection
- Two extensions of 45 cm each, if selected
- Fixings and assembly tool